Publish Time: 2021-12-21 Origin: Site
The main operating part of the electromagnetic automatic cutter grinder(knife grinder) is the electromagnetic chuck, which is also the core technology of this type of machine. The main working principle of the electromagnetic automatic cutter grinder(knife grinder) is to maintain the operation of the magnetic material through the suction cup on the electromagnetic to realize the grinding operation. The electromagnetic automatic cutter grinder(knife grinder) is simple and convenient to use, and the use effect is obvious. However, when using the electromagnetic automatic cutter grinder(knife grinder), the electromagnetic chuck also has some points that we need to pay attention to during use.
Precautions for the use of electromagnetic automatic cutter grinder(knife grinder): First of all, when the electromagnetic automatic cutter grinder(knife grinder) is used in conjunction with the machine tool, attention should be paid to the correct installation position of the machine tool. During the operation of the suction cup of the electromagnetic automatic cutter grinder(knife grinder), pay attention to the temperature in the machine, not too high or too low. After the suction cup is demagnetized, it must be coated with special oil to prevent rust and stored in a dry place.
The cutter grinder(knife grinder) manufacturer recommends you: any plywood production machinery and equipment need to be adjusted and maintained after long-term use. The electromagnetic automatic cutter grinder(knife grinder) is the same. If it is not adjusted for a long time, errors will occur, which will affect the use effect of the electromagnetic automatic cutter grinder(knife grinder) Here are a few maintenance methods for the electromagnetic automatic cutter grinder(knife grinder).
When the electromagnetic automatic cutter grinder(knife grinder) is in use, the bolts should be tightened gradually, and the value of the blade gap should be adjusted, and the value needs to meet the requirements of use. At the same time, adjust the knife edge indication of the electromagnetic automatic cutter grinder(knife grinder) to zero. The components of the electromagnetic automatic cutter grinder(knife grinder) are required to have a compact structure, a reasonable appearance deployment, and a uniform movement of the grinding head. When adjusting the electromagnetic automatic cutter grinder(knife grinder), you need to re-calibrate it with a feeler gauge. The gap between the cutting edges of the automatic automatic cutter grinder(knife grinder) is different for various sheets of different thickness.
The maintenance of the electromagnetic automatic cutter grinder(knife grinder) is the same as all plywood production machinery and equipment. Frequent inspections are required, especially the maintenance of the various parts of the electromagnetic automatic cutter grinder(knife grinder). If the parts of the electromagnetic automatic cutter grinder(knife grinder) become loose or rusted, it needs to be timely Replace it, otherwise it will affect the normal use of the electromagnetic automatic cutter grinder(knife grinder).